Engineering blog
Design-for-manufacturing guides, tolerance references and material selection notes from our process engineers.
A DFM Checklist for CNC Machined Parts: 18 Checks Before You Release
The manufacturability issues that most often send a drawing back — internal radii, deep pockets, thin walls, thread depth, tool access and datum schemes — with the numbers that make them go away.
Read more
CNC Machining Tolerances: A Practical Guide for Design Engineers
What ±0.1 mm, ISO 2768 and ±0.005 mm actually cost you, which tolerances are free, and how to mark a drawing so the shop quotes what you meant.
Read more
CNC Machining RFQ Checklist: What to Send for a Comparable Quote
A practical way to package files, quantities and acceptance requirements so suppliers can quote the same scope—and you can compare more than the unit price.
Read more
How Thin Can You Machine? Wall Thickness Limits and How to Reach Them
Why thin walls deflect, chatter and distort, the realistic minimums by material, and the fixturing, toolpath and stress-relief techniques that make 0.8 mm walls repeatable.
Read more
GD&T Basics for Machined Parts: The Six Symbols That Matter Most
Position, flatness, perpendicularity, concentricity, profile and parallelism — what each controls, how it is measured, and why ± coordinates give you a smaller tolerance zone than you think.
Read more
STEP, IGES, Parasolid or STL? Which CAD File to Send Your Machine Shop
What each format carries, what it loses, why STEP AP214 is the safe default, and why sending an STL for a machined part almost always costs you money.
Read more
Surface Finish Explained: Ra, Rz and What They Mean on a Machined Part
How surface roughness is measured, what Ra values each process delivers, when texture affects function rather than appearance, and how to specify finish so the result is repeatable.
Read moreSend us your drawing today
STEP, IGES, X_T, DWG, DXF, PDF or STL. Every file is treated as confidential and covered by NDA on request.